OM200_Radar

OM200-Radar

Quick Overview

This interface transmits radar video signals normally found in air traffic control systems.

The video signal goes from 0 V to 2-4 Vpeak, with a bandwidth of 2 or 4 MHz.

This is an interface card for the OM200 OC3 Multiplexer.

See Multiplexers/OM200 on this website.

Product Description

This interface transmits radar video signals normally found in air traffic control systems. The video signal goes from a minimum of 0 V to a maximum of 4 Vpeak, with a bandwidth of 2 or 4 MHz.

This signal connects to the OM200-Radar-IN with a 50 or 75 Ohm coaxial cable. This signal is passed to the remote node and output on the OM200-Radar-OUT card. Several data channels are passed with the video.

These cards also accept NAVALEX tm video signals where the data burst and video signal are combined. Because of the high bandwidth used by these cards, only a single Radar-In/Out pair of cards may be in a network; other types of interfaces may be installed.

The OM200-Radar cards transmit the following signals.

  • Radar video (1 channel at 4 MHz BW, or 2 channels at 2 MHz BW)
  • One Radar Trigger pulse signal
  • Four Azimuth RS422 balanced signal

Product Downloads

OM200-Radar Brochure (PDF)

Product Manuals

Enter Password to Download:

PRODUCT WARRANTY

This Luxcom product is warranted against defects in materials and workmanship for a period of five years from the date of shipment..

Luxcom will, at its option, repair or replace products that prove to be defective during the warranty period provided they are returned to Luxcom..

Repairs necessitated by misuse of the product are not covered by this warranty.

The Luxcom family is proudly vaccinated for your safety.

X