OM1006 web

OM1006A

Quick Overview

2 Optical SFP 100/1000BASE-X/SGMII
4 Electrical 10/100/1000BASE-T
PoE/PoE+ option
Jumbo packets
Provider and VLAN packet segregation
Optical receive power meters

Product Description

The OM1006 Ethernet switch has four 10/100/1000BASE-T PoE+ electrical ports and two optical SFP ports. Each RJ45 PoE port can provide up to 30W.

The SFP ports supports a variety of wavelengths, optical speeds, and fiber types depending on which SFP module is installed.

Since both 100BASE-FX and 1000BASE-X optics are supported, the optical network may be upgraded to a higher speed at a later time.

Two signal strength bar graphs show received optical link margin. The optical ports can be trunked for increased throughput and redundancy.

The RJ45 ports can be configured as port-based VLANs for traffic segregation. SPAN port monitoring is supported. The dual media converter modes support link pass through.

A USB port is provided for configuration and status.

The unit has redundant power inputs and a contact closure connector for alarms. The OM1006 is enclosed in a rugged metal case for low radiated and conducted emissions.

PRODUCT WARRANTY

This Luxcom product is warranted against defects in materials and workmanship for a period of five years from the date of shipment..

Luxcom will, at its option, repair or replace products that prove to be defective during the warranty period provided they are returned to Luxcom..

Repairs necessitated by misuse of the product are not covered by this warranty.

ACCESSORIES