Modem for synchronous/asynchronous RS232
Uses multimode or singlemode fiber
Speeds up to 100 Kbps for synchronous, and 200 Kbps for asynchronous mode.
Data rate transparent
Redundant Optics if desired
DIN rail mounting
The MOD4 DIN rail mounted modem transmits serial RS-232 data, two clocks, and all control lines over a pair of optical fibers. The modem passes synchronous data at any rate up to 100 kbps, and asynchronous data at any rate up to 200 kbps.
Singlemode or multimode fiber may be used interchangeably. If link integrity is critical, redundant optics and power supplies can be used. The MOD4-DCE version connects to a DTE, such as computer. It has an on board bit rate generator which outputs a clock if needed.
The MOD4-DTE connects to a DCE, such as a modem. When the DCE and DTE version are used together, the modems simulate a straight through cable. A DCE to DCE, or DTE to DTE configuration is also valid.
This Luxcom product is warranted against defects in materials and workmanship for a period of five years from the date of shipment..
Luxcom will, at its option, repair or replace products that prove to be defective during the warranty period provided they are returned to Luxcom..
Repairs necessitated by misuse of the product are not covered by this warranty.