This versatile OC-3 SONET multiplexer transmits multiple voice and data streams over a pair of high speed optical fibers. OM200s can be connected point-to-point, or they can be daisy chained in an add-drop manner. A comprehensive selection of interfaces allows you to design a multiplexer which meets your needs. Three chassis styles allow 2, 6, or 16 interface cards to be installed. If more interfaces are required, several chassis can be stacked at a node. Additional fibers can be installed between network endpoints to generate a self healing protection ring.
This multiplexer allows you to send multiple voice and data streams over a pair of fibers. The comprehensive selection of interfaces allows you to design a multiplexer which meets your particular requirements.
The rugged and environmentally hardened MOD6-R is a point-to-point serial data multiplexer. It transmits up to four channels. Four slower control lines are also available. The interface is either RS232, RS422/485, or RS485 2-Wire.
This din rail mounted modem transmits RS232, RS422, or RS485 data in a add-drop (drop and insert) topology where all the nodes are serially connected with fibers. It is ideally suited to a poll-response protocol where one Master node communicates with many Slave nodes. Multimode or single mode fibers can be used interchangeably.
Fiber Reach: Multimode 12 Km; Singlemode 90 Km
Data Rate: up to 40 Kbps NRZ, up to 20 Kbps Manchester
This modem transmits data in a add-drop (drop and insert) topology where all the nodes are serially connected with fibers. It is ideally suited to a poll-response protocol where one Master node communicates with many Slave nodes. This modem also has a telephone-voice channel. Multimode or single mode fibers can be used interchangeably. A display shows the status of all node on the network.
